Copper Mining Special mini-Wobbler

mini-Wobbler™ CMS

Product Line:
Mining Wobbler® Sprinklers
Product Model:
mini-Wobbler™ CMS
Part Number:
WOBxxCM230
Description:
Turquoise Body and Deflector, 1/2″ M NPT. (For the complete part number, replace xx with the desired nozzle number)
Description:
Turquoise Body and Deflector, 1/2″ M NPT (For the complete part number, replace xx with the desired nozzle number)
Warranty:
1 year on materials, workmanship, and performance
mini-Wobbler™ CMS
mini-Wobbler™ CMS
mini-Wobbler™ CMS
User installed options

Product Information

Ideal For:
Leaching solutions for copper, gold, or silver

Operating Specifications

Nozzles:
#4 - #8
Nozzle Sizes:
1.59 - 3.18 mm
Pressures:
1.03 - 1.72 bar
Flows:
95 - 495 L/hr

Specification Charts

mini-Wobbler™ CMS (Metric)

mini-Wobbler CMS
Design Criteria
bar
1.031.381.72
#4 Nozzle - Blue (1.59 mm) 
Flow (L/hr)95114127
Diameter at 0.46 m ht (m)8.18.58.8
#5 Nozzle - Brown (1.98 mm) 
Flow (L/hr)145170191
Diameter at 0.46 m ht (m)9.410.210.7
#6 Nozzle - Orange (2.38 mm) 
Flow (L/hr)216250284
Diameter at 0.46 m ht (m)10.111.011.3
#7 Nozzle - Dark Green (2.78 mm) 
Flow (L/hr)295343384
Diameter at 0.46 m ht (m)10.711.411.7
#8 Nozzle - Purple (3.18 mm) 
Flow (L/hr)379443495
Diameter at 0.46 m ht (m)10.811.711.9

Also available with #9 and #10 nozzle. Consult factory for specific performance data. Sprinkler performance may vary with actual field conditions. Upright model stream heights range from 0.46 to 0.91 m above the nozzle based on pressure and nozzle size. Minimum recommended riser height is 0.46 m.

Wobbler CMS Comparison Chart (Metric)

Low Pressure - High Performance Sprinklers
Wobbler technology™ was introduced by Senninger® Irrigation in 1978 and became an industry standard. Over the years, Senninger has developed several Wobbler sprinklers designed to improve irrigation efficiency. These sprinklers are well-known for their ability to spread water in an instantaneous, uniform pattern using very low operating pressures.

 
 mini-Wobbler CMS Xcel-Wobbler CMS High AngleXcel-Wobbler CMS Mid AngleWobbler CMS Standard AngleWobbler CMS Low Angle
Nozzles
 #4 - #8#6 - #14#6 - #14#6 - #14#6 - #14
 1.59 - 3.18 mm2.38 - 5.56 mm2.38 - 5.56 mm2.38 - 5.56 mm2.38 - 5.56 mm
Flows
 114 - 495 L/hr177 - 1583 L/hr177 - 1583 L/hr177 - 1735 L/hr177 - 1735 L/hr
Pressures
 1.03 - 1.72 bar*0.69 - 1.72 bar0.69 - 1.72 bar0.69 - 2.07 bar0.69 - 2.07 bar
Diameters
at 0.46 m
 8.5 - 11.9 m11.1 - 16.9 m9.8 - 14.2 m10.4 - 15.8 m8.8 - 14.2 m
Stream Heights
at 0.46 m
 0.46 - 0.91 m0.8 - 1.7 m0.8 - 1.2 m0.8 - 1.7 m0.8 - 1.2 m

*To ensure consistent startability, the minimum recommended nozzle size at 15 psi (1.03 bar) is #5.

Print

Would you like to go to the print version of this page?