i-Wob®2
- Outstanding uniformity over a large area for low application intensity
- Protective shroud guards the sprinkler’s wear surface from splashing of adjacent sprinklers, grit, and direct UV damage
- Longest warranty: 3 years covering materials, workmanship, and performance
Models
| Model | Part Number | Description |
|---|---|---|
| i-Wob®2 LA6 | IWOB200B3LAUP3 | Low-angle 6-groove (white deflector), 3/4" M NPT (less nozzle) |
| i-Wob®2 LA9 | IWOB200B3LA9UP3 | LA9 Low-angle 9-groove (blue deflector), 3/4" M NPT (less nozzle) |
| i-Wob®2 PC | IWOB200B3PCUP3 | Part-Circle 16-groove (mustard deflector), 3/4" M NPT (less nozzle) |
| i-Wob®2 SA6 | IWOB200B3SA6UP3 | Standard-angle 6-groove (grey deflector), 3/4" M NPT (less nozzle) |
| i-Wob®2 SA9 | IWOB200B3UP3 | Standard-angle 9-groove (black deflector), 3/4" M NPT (less nozzle) |
Create a new My List.
Contact your local distributor for product availability and ordering.
Videos
Features
Senninger® has improved the i-Wob® design with the next generation i-Wob®2 for center pivot irrigation. Featuring a protective shroud that doubles as a nozzle carrier, the i-Wob2 can better withstand harsh operating conditions. Senninger Wobbler® sprinklers are recognized worldwide for their ability to spread water in a uniform pattern that is resistant to wind drift and evaporation.
Key Benefits
Advanced Features
Senninger Wobbler technology ―rotation of grooved deflector coupled with wobbling action― provides the most uniform water application in center pivot irrigation systems. Senninger Wobbler sprinklers distribute droplets with lower application intensity over a large coverage area at low pressures.
UP3 snap-in nozzles are easy to remove for cleaning or changing. To remove the nozzle, simply pinch and pull, then place and click to re-install. There is no need to disassemble or remove the sprinkler.
The color-coded nozzles are highly visible and easy to identify. The nozzle numbers (corresponding to orifice sizes in 64ths of an inch) are visible on the ears, with half sizes denoted beneath the second digit and the notches on the lower edge of the nozzle.
Charts
| i-WOB2 System DESIGN CRITERIA | Standard Angle (Grey) 6-Groove Small Droplets | Standard Angle (Black) 9-Groove Medium Droplets | Low Angle (Blue) 9-Groove Medium Droplets | Low Angle (White) 6-Groove Large Droplets |
| Nozzle Sizes* | ||||
| at 0.41 bar * | #12 - 26 4.76 - 10.32 mm | #12 - 26 4.76 - 10.32 mm | #12 - 26 4.76 - 10.32 mm | #12 - 26 4.76 - 10.32 mm |
| at 0.69 - 1.03 bar | #10 - 26 3.97 - 10.32 mm | #6 - 26 2.38 - 10.32 mm | #6 - 26 2.38 - 10.32 mm | #12 - 26 4.76 - 10.32 mm |
| Flows | ||||
| at 0.41 bar ** | 570 - 2635 L/hr | 570 - 2635 L/hr | 570 - 2635 L/hr | 570 - 2635 L/hr |
| at 0.69 - 1.03 bar | 509 - 4168 L/hr | 182 - 4168 L/hr | 182 - 4168 L/hr | 736 - 4168 L/hr |
| Diameters | ||||
| 0.91 m height at 0.41 bar ** | 8.0 - 9.1 m | 9.1 - 10.4 m | 8.5 - 9.1 m | 8.5 - 9.8 m |
| 0.91 m height at 0.69 - 1.03 bar | 11.0 - 14.0 m | 9.5 - 16.2 m | 9.5 - 14.3 m | 12.2 - 14.9 m |
| 1.83 m height at 0.41 bar ** | 9.1 - 10.4 m | 11.0 - 12.8 m | 9.8 - 10.7 m | 9.8 - 11.9 m |
| 1.83 m height at 0.69 - 1.03 bar | 10.7 - 15.2 m | 10.4 - 17.4 m | 10.7 - 15.2 m | 13.4 - 16.2 m |
| 2.74 m height at 0.41 bar ** | 10.4 - 11.0 m | 12.2 - 14.0 m | 11.0 - 12.8 m | 10.4 - 13.4 m |
| 2.74 m height at 0.69 - 1.03 bar | 11.0 - 15.8 m | 11.6 - 18.0 m | 11.9 - 16.8 m | 14.0 - 17.4 m |
| Maximum Spacing*** | ||||
| at 0.41 bar ** | 3 m | 3 m | 3 m | 3 m |
| at 0.69 - 1.03 bar | 5.5 m | 6.1 m | 5.5 m | 4.6 m |
| Pressure at the Nozzle | ||||
| Minimum** | 0.41 bar | 0.41 bar | 0.41 bar | 0.41 bar |
| Maximum | 1.03 bar | 1.03 bar | 1.03 bar | 1.03 bar |
*It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.
** Hunter Agricultural Irrigation recommends 0.69 bar for optimum performance; 0.41 bar can be used for nozzles #12 and larger.
*** For optimum performance, Hunter Agricultural Irrigation recommends the use of maximum spacing for 1-2 spans only.
Installation Requirement: Always mount the i-Wob2 on a minimum of 0.6 m reinforced flexible hose. The hose must be on the outlet end of any semi-rigid or rigid drop.
Keep i-Wobs above crop canopy when outlet spacing exceeds 3.0 m. This is especially important on high profile crops.
| I-WOB2 PART-CIRCLE DESIGN CRITERIA | Part Circle (Mustard) 16-Groove |
| Nozzle Sizes | |
| Minimum | #7 2.78 mm |
| Maximum* | #26 10.32 mm |
| Flows | |
| Minimum | 248 L/hr |
| Maximum | 4168 L/hr |
| Radius | |
| At 0.91 m Height | 4.9 - 5.8 m |
| At 1.83 m Height | 6.1 - 7.3 m |
| At 2.74 m Height | 6.7 - 7.9 m |
| Pressures | |
| Minimum | 0.69 bar |
| Maximum | 1.03 bar |
*It is recommended that larger nozzle sizes be used only on soils that can handle higher application rates.
Documents
Select Type
- All Documents
- Manuals
- Marketing
- Specifications
- Replacement Parts
Photos
Application Photos
Download Image
Medium OriginalDownload Image
Medium OriginalDownload Image
Medium Original
Download Image
Medium Original
Download Image
Medium OriginalDownload Image
Medium Original
Download Image
Medium OriginalDownload Image
Medium OriginalDownload Image
Medium OriginalStudio Photos
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original


