Xcel-Wobbler™ CMS

The Senninger® Xcel-Wobbler™ CMS for mining provides instantaneous and uniform coverage over large diameters with low evaporative losses. It is built for stronger and more durable performance in gold, silver, and copper mining applications.

Flows: 177 to 1415 L/hr

Pressures: 0.69 to 1.38 bar

Outstanding uniformity: instantaneously over a large area for low application intensity
Long life: only one moving part; constructed with the highest engineering-grade thermoplastic resins to resist corrosion, abrasion, ultraviolet degradation, and chemical degradation due to the use of sulfuric acid, cyanide, and more.

Models

Model	Part Number	Description
Xcel-Wobbler™ CMS High-Angle	See additional information	Turquoise with turquoise deflector, 1/2" or 3/4″ M NPT
Xcel-Wobbler™ CMS Mid-Angle	See additional information	Turquoise with yellow deflector, 1/2" or 3/4" M NPT

Contact your local distributor for product availability and ordering.

Videos

Benefits of Senninger® Wobbler® Technology for Heap Leaching

Wobblers uniformly distribute the leaching solution over a large surface area to maximize solution/ore contact.

All Product Videos

Features

The Copper Mining Special Xcel-Wobbler™ uses Senninger Wobbler® Technology with a unique off-center rotary action that provides extremely uniform solution distribution, which is essential to maximizing metals recovery. Wobbler Technology sprinklers are the most effective method for total solution contact due to the consistent droplet size that covers a full 360-degree area instantaneously, so the solution reaches the entire surface with a gentle and even distribution.

Key Benefits

Outstanding uniformity helps ensure consistent coverage for leach solution application.

Low-pressure operation minimizes evaporative losses, saves energy, and allows greater areas to be leached in less time. This can save money and increase productivity.

Counter-balance reduces vibration for a smooth, stable performance.

Charts

Xcel-Wobbler CMS Design Criteria	bar
Xcel-Wobbler CMS Design Criteria	0.69	1.04	1.38
#6 Nozzle - Gold (2.38 mm)
Flow (L/hr)	177	216	250
HA Diameter at 0.46 m ht (m)	11.1	12.5	13.7
MA Diameter at 0.46 m ht (m)	9.8	10.7	11.7
#7 Nozzle - Lime (2.78 mm)
Flow (L/hr)	241	295	341
HA Diameter at 0.46 m ht (m)	12.2	14.2	14.3
MA Diameter at 0.46 m ht (m)	10.1	11.1	12.3
#8 Nozzle - Lavender (3.18 mm)
Flow (L/hr)	318	388	450
HA Diameter at 0.46 m ht (m)	12.8	14.2	14.3
MA Diameter at 0.46 m ht (m)	10.4	11.7	12.5
#9 Nozzle - Grey (3.57 mm)
Flow (L/hr)	409	500	577
HA Diameter at 0.46 m ht (m)	13.4	14.3	15.4
MA Diameter at 0.46 m ht (m)	10.5	12.4	12.8
#10 Nozzle - Turquoise (3.97 mm)
Flow (L/hr)	504	618	713
HA Diameter at 0.46 m ht (m)	13.6	14.9	15.4
MA Diameter at 0.46 m ht (m)	11.0	12.5	13.0
#11 Nozzle - Yellow (4.37 mm)
Flow (L/hr)	611	749	865
HA Diameter at 0.46 m ht (m)	13.6	15.4	15.7
MA Diameter at 0.46 m ht (m)	11.0	12.7	13.1
#12 Nozzle - Red (4.76 mm)
Flow (L/hr)	734	899	1038
HA Diameter at 0.46 m ht (m)	14.0	15.4	15.9
MA Diameter at 0.46 m ht (m)	11.1	12.2	13.6
#13 Nozzle - White (5.16 mm)
Flow (L/hr)	863	1056	1222
HA Diameter at 0.46 m ht (m)	14.2	15.6	16.0
MA Diameter at 0.46 m ht (m)	11.1	12.7	13.6
#14 Nozzle - Blue (5.56 mm)
Flow (L/hr)	999	1224	1415
HA Diameter at 0.46 m ht (m)	14.3	15.6	16.2
MA Diameter at 0.46 m ht (m)	11.3	13.0	13.7

Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data. Stream heights range from 0.8 to 1.7 m above nozzle based on pressure and nozzle size. Minimum recommended riser height is 0.46 m.

Low Pressure - High Performance Sprinklers
Wobbler technology™ was introduced by Senninger® Irrigation in 1978 and became an industry standard. Over the years, Senninger has developed several Wobbler sprinklers designed to improve irrigation efficiency. These sprinklers are well-known for their ability to spread water in an instantaneous, uniform pattern using very low operating pressures.


	mini-Wobbler CMS	Xcel-Wobbler CMS High Angle	Xcel-Wobbler CMS Mid Angle	Wobbler CMS Standard Angle	Wobbler CMS Low Angle
Nozzles
	#4 - #8	#6 - #14	#6 - #14	#6 - #14	#6 - #14
	1.59 - 3.18 mm	2.38 - 5.56 mm	2.38 - 5.56 mm	2.38 - 5.56 mm	2.38 - 5.56 mm
Flows
	114 - 495 L/hr	177 - 1583 L/hr	177 - 1583 L/hr	177 - 1735 L/hr	177 - 1735 L/hr
Pressures
	1.03 - 1.72 bar*	0.69 - 1.72 bar	0.69 - 1.72 bar	0.69 - 2.07 bar	0.69 - 2.07 bar
Diameters at 0.46 m
	8.5 - 11.9 m	11.1 - 16.9 m	9.8 - 14.2 m	10.4 - 15.8 m	8.8 - 14.2 m
Stream Heights at 0.46 m
	0.46 - 0.91 m	0.8 - 1.7 m	0.8 - 1.2 m	0.8 - 1.7 m	0.8 - 1.2 m