Create a new My List.
Xcel-Wobbler™ CMS Mid-Angle
More information about Xcel-Wobbler™ CMS
Product Information
Operating Specifications
Additional Information
| XCEL-WOBBLER™ CMS (MID-ANGLE) | |
|---|---|
| Part Number | Description |
| XWOBxxCMB3MA | Turquoise with yellow deflector, 3/4" M NPT (complete*) |
| XWOBxxCMB2MA | Turquoise with yellow deflector, 1/2" M NPT (complete*) |
*Add the nozzle number to replace xx for the complete part number. For example: XWOB12CMB3HALD is a CMS Xcel-Wobbler with a number 12 nozzle and a 3/4" base high-angle model.
Specification Charts
Xcel-Wobbler™ CMS (Metric)
| Xcel-Wobbler CMS Design Criteria | bar | ||
| 0.69 | 1.04 | 1.38 | |
| #6 Nozzle - Gold (2.38 mm) | |||
| Flow (L/hr) | 177 | 216 | 250 |
| HA Diameter at 0.46 m ht (m) | 11.1 | 12.5 | 13.7 |
| MA Diameter at 0.46 m ht (m) | 9.8 | 10.7 | 11.7 |
| #7 Nozzle - Lime (2.78 mm) | |||
| Flow (L/hr) | 241 | 295 | 341 |
| HA Diameter at 0.46 m ht (m) | 12.2 | 14.2 | 14.3 |
| MA Diameter at 0.46 m ht (m) | 10.1 | 11.1 | 12.3 |
| #8 Nozzle - Lavender (3.18 mm) | |||
| Flow (L/hr) | 318 | 388 | 450 |
| HA Diameter at 0.46 m ht (m) | 12.8 | 14.2 | 14.3 |
| MA Diameter at 0.46 m ht (m) | 10.4 | 11.7 | 12.5 |
| #9 Nozzle - Grey (3.57 mm) | |||
| Flow (L/hr) | 409 | 500 | 577 |
| HA Diameter at 0.46 m ht (m) | 13.4 | 14.3 | 15.4 |
| MA Diameter at 0.46 m ht (m) | 10.5 | 12.4 | 12.8 |
| #10 Nozzle - Turquoise (3.97 mm) | |||
| Flow (L/hr) | 504 | 618 | 713 |
| HA Diameter at 0.46 m ht (m) | 13.6 | 14.9 | 15.4 |
| MA Diameter at 0.46 m ht (m) | 11.0 | 12.5 | 13.0 |
| #11 Nozzle - Yellow (4.37 mm) | |||
| Flow (L/hr) | 611 | 749 | 865 |
| HA Diameter at 0.46 m ht (m) | 13.6 | 15.4 | 15.7 |
| MA Diameter at 0.46 m ht (m) | 11.0 | 12.7 | 13.1 |
| #12 Nozzle - Red (4.76 mm) | |||
| Flow (L/hr) | 734 | 899 | 1038 |
| HA Diameter at 0.46 m ht (m) | 14.0 | 15.4 | 15.9 |
| MA Diameter at 0.46 m ht (m) | 11.1 | 12.2 | 13.6 |
| #13 Nozzle - White (5.16 mm) | |||
| Flow (L/hr) | 863 | 1056 | 1222 |
| HA Diameter at 0.46 m ht (m) | 14.2 | 15.6 | 16.0 |
| MA Diameter at 0.46 m ht (m) | 11.1 | 12.7 | 13.6 |
| #14 Nozzle - Blue (5.56 mm) | |||
| Flow (L/hr) | 999 | 1224 | 1415 |
| HA Diameter at 0.46 m ht (m) | 14.3 | 15.6 | 16.2 |
| MA Diameter at 0.46 m ht (m) | 11.3 | 13.0 | 13.7 |
Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data. Stream heights range from 0.8 to 1.7 m above nozzle based on pressure and nozzle size. Minimum recommended riser height is 0.46 m.
Wobbler CMS Comparison Chart (Metric)
Low Pressure - High Performance Sprinklers
Wobbler technology™ was introduced by Senninger® Irrigation in 1978 and became an industry standard. Over the years, Senninger has developed several Wobbler sprinklers designed to improve irrigation efficiency. These sprinklers are well-known for their ability to spread water in an instantaneous, uniform pattern using very low operating pressures.
 |  |  |  |  | ||
|---|---|---|---|---|---|---|
| mini-Wobbler CMS | Xcel-Wobbler CMS High Angle | Xcel-Wobbler CMS Mid Angle | Wobbler CMS Standard Angle | Wobbler CMS Low Angle | ||
| Nozzles | ||||||
| #4 - #8 | #6 - #14 | #6 - #14 | #6 - #14 | #6 - #14 | ||
| 1.59 - 3.18 mm | 2.38 - 5.56 mm | 2.38 - 5.56 mm | 2.38 - 5.56 mm | 2.38 - 5.56 mm | ||
| Flows | ||||||
| 114 - 495 L/hr | 177 - 1583 L/hr | 177 - 1583 L/hr | 177 - 1735 L/hr | 177 - 1735 L/hr | ||
| Pressures | ||||||
| 1.03 - 1.72 bar* | 0.69 - 1.72 bar | 0.69 - 1.72 bar | 0.69 - 2.07 bar | 0.69 - 2.07 bar | ||
| Diameters at 0.46 m | ||||||
| 8.5 - 11.9 m | 11.1 - 16.9 m | 9.8 - 14.2 m | 10.4 - 15.8 m | 8.8 - 14.2 m | ||
| Stream Heights at 0.46 m | ||||||
| 0.46 - 0.91 m | 0.8 - 1.7 m | 0.8 - 1.2 m | 0.8 - 1.7 m | 0.8 - 1.2 m | ||
*To ensure consistent startability, the minimum recommended nozzle size at 15 psi (1.03 bar) is #5.