FILTER REGULATOR
MODELS		Preset Outlet
Pressure		Maximum Inlet
Pressure		Mesh Filter ScreenMesh Orifice
(microns)		UP3 Nozzle
Number
FPSR2063M3F200.41 bar5.51 bar20 mesh (black rings)841#13 - #26
FPSR2063M3F3030 mesh (green rings)595#6 - #12.5
FPSR2063M3F4040 mesh (grey rings)400#2 - #5.5
FPSR2103M3F200.69 bar6.20 bar20 mesh (black rings)841#13 - #26
FPSR2103M3F3030 mesh (green rings)595#6 - #12.5
FPSR2103M3F4040 mesh (grey rings)400#2 - #5.5
FPSR2153M3F201.03 bar6.55 bar20 mesh (black rings)841#13 - #26
FPSR2153M3F3030 mesh (green rings)595#6 - #12.5
FPSR2153M3F4040 mesh (grey rings)400#2 - #5.5
FPSR2203M3F201.38 bar6.89 bar20 mesh (black rings)841#13 - #26
FPSR2203M3F3030 mesh (green rings)595#6 - #12.5
FPSR2203M3F4040 mesh (grey rings)400#2 - #5.5
 
FPSR2103M3F1200.69 bar6.20 bar120 mesh screen (red rings)1251140 - 3407 L/hr
FPSR2103M3F140140 mesh screen (blue rings)105
FPSR2153M3F1201.03 bar6.55 bar120 mesh screen (red rings)1251140 - 3407 L/hr
FPSR2153M3F140140 mesh screen (blue rings)105
FPSR2203M3F1201.38 bar6.89 bar120 mesh screen (red rings)1251140 - 3407 L/hr
FPSR2203M3F140140 mesh screen (blue rings)105

Shaded models designed for use with drip systems.

The pressure regulator shall maintain the predetermined operating pressure provided that the inlet pressure is at least 5 psi (0.34 bar) above the expected outlet pressure, with flows up to 11 gpm (2498 L/hr), but not exceeding the maximum inlet pressure of 80 psi (5.5 bar) above the model’s pressure rating. Higher flows require additional inlet pressure to engage the regulator. Where flows are greater than 11 gpm (2498 L/hr), the inlet pressure should be at least 9 psi (0.62 bar) above the expected outlet pressure but not exceeding the maximum inlet pressure as shown above.

Pressure regulators should always be installed downstream of all shut-off valves.

Recommended for outdoor use only. Not NSF certified.

Find Hunter