System Activation Checklist

Starting irrigation for the season? Follow this checklist to safely reactivate the system and ensure components are operating properly.

  • 1

    Slowly Open the Main Water Valve

    Open the system main water valve slowly to allow pipes to fill with water gradually. If these valves are opened too quickly, sprinkler mainlines can be subjected to high surge pressures, uncontrolled flow, and water hammer, which may cause them to crack or burst.

  • 2

    Manually Activate All Zones

    Verify the proper operation of each station valve by manually activating all zones from the controller or from the app if it is a connected controller.

  • 3

    Check Each Station Thoroughly

    Walk through each station to check for proper operation. Confirm proper operating pressure (low pressure indicates a line break or missing sprinkler), proper rotation and adjustment of sprinkler heads, and adequate coverage. Check and clean filters on poorly performing sprinklers. Adjust heads to grade as necessary.

  • 4

    Make Automatic Watering Adjustments

    Reprogram the controller for automatic watering. If necessary, replace the controller backup battery.

  • 5

    Clean Weather Sensors

    Uncover and clean all system weather sensors, if applicable.

For the best results, make sure the system satisfies all necessary hydraulic requirements, meets specific plant watering needs, and complements the soil conditions. Consult additional qualified experts if necessary.

 

Hunter Solutions

Unlock lasting performance all year long with dependable Hunter irrigation solutions.

 

Get Connected

It’s easy to find the expert support you need. Whether you’re looking for an authorized distributor, a qualified contractor, or additional resources, we're ready to help.

Find Hunter