To improve Wi-Fi visibility to the router, we recommend using the extension kit (model: ANT-EXT-KIT). This is not a signal booster, but an option to get the antenna closer to the router. Going around corners, through obstructions, or just reducing the distance are appropriate applications for this product.
The connector is an SMA-style connector that is commonly used in RF applications, such as antennas, radio systems, Wi-Fi devices, and coaxial cables, because it provides a reliable connection with minimal signal loss.
Please visit an authorized Hunter distributor near you using our interactive Distributor Lookup
| Item | Description | |
|---|---|---|
| 1 | Antenna Mount Base |  |
| 2 | Antenna Mount Adapter | |
| 3 | Ground Plane for WVOM Antenna | |
| 4 | Antenna Mount Cover | |
| 5 | 9' (3 m) Cable Extension | |
| 6 | Wall Mounting Screws and Anchors | |
| 7 | SMA Adapter A (RP-SMA Male x SMA Female) | |
| 8 | SMA Adapter B (SMA Male x RP-SMA Female) |
Installation
- Remove the plastic cover (three screws) from the back of the HCC facepack and remove the
existing Wi-Fi antenna. - Thread the SMA Adapter A (component #7) onto the male end of the extension cable.
- Connect the extension cable to the antenna connector on the facepack, then route it out of the cabinet to the desired mounting location.
- Install SMA Adapter B (component #8) on the other end of the cable and feed the cable up
through the bottom of the antenna mounting base. - Position the antenna mount adapter as shown, and secure the cable in place using the locknut on the connector.
- Reinstall the Wi-Fi antenna, and insert the antenna mount adapter into the mounting base.
- Attach the antenna mount cover to the base by twisting the two pieces together clockwise.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.