Welcome Page Body
Hydrawise supports a range of sensors that provide direct communication to the controller via the sensor ports. The software supports standard open/closed contact sensors, such as rain, soil moisture, and other ON/OFF sensors. Hydrawise also supports flow monitoring when used with a Hunter HC Flow Meter.
Section Menu
Sensors
-
Standard Sensor
Hydrawise® Software supports standard open/closed contact rain and soil moisture sensors. You can use any generic sensor type with an open/closed contact.These sensors use two
Flow Meters
-
Installation
In this Quick Start Guide, you'll learn how to install and configure your flow meter. If you need Hydrawise® Software support or help with your Hydrawise account, visit our App
-
Testing the Flow Meter
If your flow meter actively shows numbers turning on the dial but does not record data, you might have a connection problem. The flow meter must be configured in the app, and your
-
Winterizing: Removing the Flow Meter
We recommend that a qualified licensed contractor perform this type of winterization method. The blowout method utilizes an air compressor with a cubic foot per minute (CFM) rating
-
Flow Meter Gaskets
Replacement HC Flow Meter gaskets are available as spare parts. They are bagged in quantities of 10/bag, and 2/bag depending on which meter you have installed. Please refer to the
-
Flow Meter Measurement
The flow meter body includes an analog dial for manual readings. Each unit has three wires extending from the body, which are intended for connection to the sensor inputs on the
FAQ's
Wireless HC Flow Meter
-
Introduction
Never tunnel under or cut through a sidewalk again! Add wireless flow monitoring capabilities to your Hydrawise® control system with this simple wireless communication kit. The
-
Overview & Operations
The Wireless HC Flow Communication Kit (P/N: WHCFLOW) pairs with any HC Flow Meter* to provide wireless flow monitoring capabilities with Hydrawise® enabled controllers. (*meter