Copper Mining Special mini-Wobbler

mini-Wobbler™ CMS

Product Line:
Mining Wobbler® Sprinklers
Product Model:
mini-Wobbler™ CMS
Description:
Turquoise Body and Deflector, 1/2″ M NPT. (For the complete part number, replace xx with the desired nozzle number)
Description:
Turquoise Body and Deflector, 1/2″ M NPT (For the complete part number, replace xx with the desired nozzle number)
Warranty:
1 year on materials, workmanship, and performance
mini-Wobbler™ CMS
mini-Wobbler™ CMS
mini-Wobbler™ CMS
User installed options

Product Information

Ideal For:
Leaching solutions for copper, gold, or silver

Operating Specifications

Nozzles:
#4 - #8
Nozzle Sizes:
1/16" - 1/8"
Pressures:
15 - 25 psi
Flows:
0.42 - 2.18 gpm

Specification Charts

mini-Wobbler™ CMS

mini-wobbler CMS 
Design Criteria
psi
152025
#4 Nozzle - Blue (1/16") 
Flow (gpm)-0.500.56
Diameter at 1.5 ft ht (ft)-28.029.0
#5 Nozzle - Brown (5/64") 
Flow (gpm)0.640.750.84
Diameter at 1.5 ft ht (ft)31.033.535.0
#6 Nozzle - Orange (3/32") 
Flow (gpm)0.951.101.25
Diameter at 1.5 ft ht (ft)33.036.037.0
#7 Nozzle - Dark Green (7/64") 
Flow (gpm)1.301.511.69
Diameter at 1.5 ft ht (ft)35.037.538.5
#8 Nozzle - Purple (1/8") 
Flow (gpm)1.671.952.18
Diameter at 1.5 ft ht (ft)35.538.539.0

Also available with #9 and #10 nozzle. Consult factory for specific performance data. Sprinkler performance may vary with actual field conditions. Upright model stream heights range from 1.5 to 3.0 ft above the nozzle based on pressure and nozzle size. Minimum recommended riser height is 1.5 ft.

Wobbler CMS Comparison Chart

Low Pressure - High Performance Sprinklers
Wobbler technology™ was introduced by Senninger® Irrigation in 1978 and became an industry standard. Over the years, Senninger has developed several Wobbler sprinklers designed to improve irrigation efficiency. These sprinklers are well-known for their ability to spread water in an instantaneous, uniform pattern using very low operating pressures.

  
 mini-Wobbler CMS Xcel-Wobbler CMS High AngleXcel-Wobbler CMS Mid AngleWobbler CMS Standard AngleWobbler CMS Low Angle 
Nozzles
 #4 - #8#6 - #14#6 - #14#6 - #14#6 - #14 
 1/16 - 1/8"3/32 - 7/32"3/32 - 7/32"3/32 - 7/32"3/32 - 7/32" 
Flows
 0.50 - 2.18 gpm0.78 - 6.97 gpm0.78 - 6.97 gpm0.78 - 7.64 gpm0.78 - 7.64 gpm 
Pressures
 15 - 25 psi*10 - 25 psi10 - 25 psi10 - 30 psi10 - 30 psi 
Diameters
at 1.5 ft
 28 - 39.0 ft36.5 - 55.5 ft32.0 - 46.5 ft34.0 - 52.0 ft29.0 - 46.5 ft 
Stream Heights
at 1.5 ft
 1.5 - 3.0 ft2.5 - 5.5 ft2.5 - 4.0 ft2.5 - 5.5 ft2.5 - 4.0 ft 

*To ensure consistent startability, the minimum recommended nozzle size at 15 psi (1.03 bar) is #5.

Print

Would you like to go to the print version of this page?