Create a new My List.
Xcel-Wobbler™ CMS Mid-Angle
More information about Xcel-Wobbler™ CMS
Product Information
Operating Specifications
Additional Information
| XCEL-WOBBLER™ CMS (MID-ANGLE) | |
|---|---|
| Part Number | Description |
| XWOBxxCMB3MA | Turquoise with yellow deflector, 3/4" M NPT (complete*) |
| XWOBxxCMB2MA | Turquoise with yellow deflector, 1/2" M NPT (complete*) |
*Add the nozzle number to replace xx for the complete part number. For example: XWOB12CMB3HALD is a CMS Xcel-Wobbler with a number 12 nozzle and a 3/4" base high-angle model.
Specification Charts
Xcel-Wobbler™ CMS
| Xcel-Wobbler CMS Design Criteria | psi | ||
| 10 | 15 | 20 | |
| #6 Nozzle - Gold (3/32") | |||
| Flow (gpm) | 0.78 | 0.95 | 1.10 |
| HA Diameter at 1.5 ft ht (ft) | 36.5 | 41.0 | 45.0 |
| MA Diameter at 1.5 ft ht (ft) | 32.0 | 35.0 | 38.5 |
| #7 Nozzle - Lime (7/64") | |||
| Flow (gpm) | 1.06 | 1.30 | 1.50 |
| HA Diameter at 1.5 ft ht (ft) | 40.0 | 46.5 | 47.0 |
| MA Diameter at 1.5 ft ht (ft) | 33.0 | 36.5 | 40.5 |
| #8 Nozzle - Lavender (1/8") | |||
| Flow (gpm) | 1.40 | 1.71 | 1.98 |
| HA Diameter at 1.5 ft ht (ft) | 42.0 | 46.5 | 47.0 |
| MA Diameter at 1.5 ft ht (ft) | 34.0 | 38.5 | 41.0 |
| #9 Nozzle - Grey (9/64") | |||
| Flow (gpm) | 1.80 | 2.20 | 2.54 |
| HA Diameter at 1.5 ft ht (ft) | 44.0 | 47.0 | 50.5 |
| MA Diameter at 1.5 ft ht (ft) | 34.5 | 40.5 | 42.0 |
| #10 Nozzle - Turquoise (5/32") | |||
| Flow (gpm) | 2.22 | 2.72 | 3.14 |
| HA Diameter at 1.5 ft ht (ft) | 44.5 | 49.0 | 50.5 |
| MA Diameter at 1.5 ft ht (ft) | 36.0 | 41.0 | 42.5 |
| #11 Nozzle - Yellow (11/64") | |||
| Flow (gpm) | 2.69 | 3.30 | 3.81 |
| HA Diameter at 1.5 ft ht (ft) | 44.5 | 50.5 | 51.5 |
| MA Diameter at 1.5 ft ht (ft) | 36.0 | 41.5 | 43.0 |
| #12 Nozzle - Red (3/16") | |||
| Flow (gpm) | 3.23 | 3.96 | 4.57 |
| HA Diameter at 1.5 ft ht (ft) | 46.0 | 50.5 | 52.0 |
| MA Diameter at 1.5 ft ht (ft) | 36.5 | 41.5 | 44.5 |
| #13 Nozzle - White (13/64") | |||
| Flow (gpm) | 3.80 | 4.65 | 5.38 |
| HA Diameter at 1.5 ft ht (ft) | 46.5 | 51.0 | 52.5 |
| MA Diameter at 1.5 ft ht (ft) | 36.5 | 41.5 | 44.5 |
| #14 Nozzle - Blue (7/32") | |||
| Flow (gpm) | 4.40 | 5.39 | 6.23 |
| HA Diameter at 1.5 ft ht (ft) | 47.0 | 51.0 | 53.0 |
| MA Diameter at 1.5 ft ht (ft) | 37.0 | 42.5 | 45.0 |
Sprinkler performance may vary with actual field conditions. Other nozzle sizes are available. Consult factory for specific performance data. Stream heights range from 2.5 to 5.5 ft above nozzle based on pressure and nozzle size. Minimum recommended riser height is 1.5 ft.
Wobbler CMS Comparison Chart
Low Pressure - High Performance Sprinklers
Wobbler technology™ was introduced by Senninger® Irrigation in 1978 and became an industry standard. Over the years, Senninger has developed several Wobbler sprinklers designed to improve irrigation efficiency. These sprinklers are well-known for their ability to spread water in an instantaneous, uniform pattern using very low operating pressures.
 |  |  |  |  | ||
|---|---|---|---|---|---|---|
| mini-Wobbler CMS | Xcel-Wobbler CMS High Angle | Xcel-Wobbler CMS Mid Angle | Wobbler CMS Standard Angle | Wobbler CMS Low Angle | ||
| Nozzles | ||||||
| #4 - #8 | #6 - #14 | #6 - #14 | #6 - #14 | #6 - #14 | ||
| 1/16 - 1/8" | 3/32 - 7/32" | 3/32 - 7/32" | 3/32 - 7/32" | 3/32 - 7/32" | ||
| Flows | ||||||
| 0.50 - 2.18 gpm | 0.78 - 6.97 gpm | 0.78 - 6.97 gpm | 0.78 - 7.64 gpm | 0.78 - 7.64 gpm | ||
| Pressures | ||||||
| 15 - 25 psi* | 10 - 25 psi | 10 - 25 psi | 10 - 30 psi | 10 - 30 psi | ||
| Diameters at 1.5 ft | ||||||
| 28 - 39.0 ft | 36.5 - 55.5 ft | 32.0 - 46.5 ft | 34.0 - 52.0 ft | 29.0 - 46.5 ft | ||
| Stream Heights at 1.5 ft | ||||||
| 1.5 - 3.0 ft | 2.5 - 5.5 ft | 2.5 - 4.0 ft | 2.5 - 5.5 ft | 2.5 - 4.0 ft | ||
*To ensure consistent startability, the minimum recommended nozzle size at 15 psi (1.03 bar) is #5.