The flow meter body includes an analog dial for manual readings. Each unit has three wires extending from the body, which are intended for connection to the sensor inputs on the controller for use with the software application.
Only two wires—blue and white—are required for proper operation in all models. Ensure these wires are securely connected to the appropriate sensor input terminals on the controller.
Refer to the chart below to determine how to properly calculate the total flow measured by your meter (e.g., meter reads 8'142.46 GPM).
| Marking | Description | |
|---|---|---|
| 1 | Flow indicator | The indicator will move when the flow occurs |
| 2 | Meter Size | Indicates the size of the flow meter |
| 3 | X0.01 Dial marking | 0.01 gal |
| 4 | X0.1 Dial marking | 0.1 gal |
| 5 | X1 Dial marking | 1 gal |
| 6 | X10 Dial marking | 10 gal |
| 7 | X100 Dial marking | 100 gal |
 | ||
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.