SkyCommand™ Support

  • Specifications
    Operating Specifications:• IP55 rated• Compatible sensors: Hunter Rain-Clik® and Mini-Clik® Sensors• SDHC card reader for firmware updates (card included with firmware updates
  • Components
    This unit includes mounting holes for installation and a wiring compartment secured by a door screw that, when removed, provides access to the AC power wiring terminals, fuse, rain
  • Installation
    These instructions cover using a 1.5" hole saw to mount BOC antennas in plastic valve box lids, noting that it may not cut through all lid types and should not be used on metal or
  • Rain Sensor
    Rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated, interrupting the controller circuit and shutting off the UCH system.IMPORTANT: Only
  • Network Setup
    Download the free Hunter SkyCommand App, available for Android and iOS. Ensure Bluetooth and Location Services are enabled on the mobile device.Slide the UCH door up to the first
  • Field Communication
    The LoRa Modules provide “field” communications for the Hunter Universal Communications Hub (UCH). They communicate directly with battery-operated field controllers. The LoRa
  • Cloud Communication
    The hub includes two module slots. Communication modules are ordered separately. One slot is used for the cloud connection to Centralus™ Software or another control system.Only one
  • Installation
    The BOC series of battery-operated controllers (BOC) enables wireless programming of waterproof controllers via Hunter Centralus™ Software (or other authorized networks). Operating
  • Add Device
    To add a device in the Centralus software, you must first locate the serial number printed on the side of the Battery Operated Controller (BOC). After completing steps 1-3, enter
  • Soil Sensor
    Use the gray loop on each BOC device to connect a soil moisture sensor (P/N SC-PROBE). This helps prevent watering when soil moisture exceeds your programmed threshold. Follow the
  • Flow Sensor
    A Flow Sensor monitors flow to an entire irrigation system or through an individual valve. In the event of an overflow, this sensor will automatically shut down the irrigation
  • Solar panel
    Recommended tools:Small needle-nosed pliersSmall Phillips screwdriverThe Hunter BOC-SOL provides optional solar power to Hunter BOC-xxx Battery-Operated Controllers. BOC-SOL
  • Factory Reset (BOC)
    A factory reset clears all programming from the BOC so you can reprogram it.
  • Firmware Update
    Firmware is the software operating system inside a controller or network module. Battery-operated controllers require the latest operating system for optimal performance. If it

Find Hunter